2005年2月12日 · A drag racing Jeep? Now thats a head turner. I don't know too much about the type of setup that would be required to do that (sucessfully) with a cherokee, but if you get it to work the reactions you'd get would be priceless.

2006年11月14日 · 2002 WJ 4.0 - Blue Jeep Club #255 (totalled by drunk driver) 1994 3000GT VR-4 (11.8 @ 116, 17psi, pump gas & street tires)

2009年2月25日 · TF-727/904/998 is a Chrysler tranny that was used for many years in all Chrysler products. The internals exchance easily, but the exterior is AMC only. TF-727 is a very heavy duty transmission, can hold almost anything, but on the downside is very heavy, and this way inappropriate for drag racing use.

2015年8月12日 · I've got a jk with a RK, 2.5" max travel lift, adjustable track bar, stock draglink. The jeep actually gained 3" of lift from this kit, I've looked into a draglink flip kit, which is typically recommended at 3" of lift or more, if I flip my draglink and …

2011年12月9日 · You might like this guys postal Jeep. He's into drag racing it. http://www.jeepforum.com/forum/showthread.php?t=2383593 I find it comical that a sleeper POS postal Jeep smokes a nice 5.0 Mustang

2005年5月4日 · You would also save weight with 2wd. Leave the Jeep for the trails where it will shine, and let the NASCAR boys drag their blimpie Chevelles at the strip with the fat and the frustrated boy ricers. Drag racing has its place, but a Jeep …

2009年7月11日 · I have seen 4 mud bog drag racing events... Some were 150k plus rigs with a 502 no expense spared on the rigs all fittings Aircraft grade aluminum... and they lost to a stock engine TJ lifted locked ... Ive also seen a $2k 4cyl Yota almost beat a LT1 CJ with NOS on Rockwells on 44s ...

2007年3月16日 · Teens deported after stop for drag racing © 2007 The Associated Press PHOENIX - Three Phoenix area high school students were deported to Mexico after a...

2020年5月20日 · I notice there is drag racing in Israel, good chance there are some racers using/importing oils and lubricants, this may be a source of supply. I found that the Jeep Dealer local to me supplied the wrong stuff, as 99wjtx says it's a case of read the label, but obviously easier if someone can advise on the correct product.

2015年8月10日 · I live in Augusta, GA just over the GA/SC border from Johnston, SC. I looked at CME to do my 401 build because I was attracted by the high volume of engines they do, the dyno results in house and post-build warranty. I have heard good things about them and I know that they are actively involved in the local drag racing scene here.