2020年9月30日 · With an air chisel and a 5/16" punch it takes about 3 seconds to remove the roll pin. If trail repairs are needed a 5/16 x 16" punch and 2lb hammer does the trick in a few minutes (yes I carry these in my tool kit LOL). Anyway, see for yourself: Some like to use a 5/15" bolt for "ease" of removal. Polaris used a roll pin and not a bolt for a ...

2016年3月7日 · Now little Johnny beat and beat on removing his roll pin with a mini sledgehammer and punch for hours. Finally he had success removing it. Little Johnny is smart enough to realize that since Polaris has used a roll pin for years that there must be a good reason for using it, so on install he beat in a new roll pin.

2009年1月28日 · The roll pin punch set is by far the best advice you will ever get. I spent 20 years as a diesel mechanic and have made more work for myself countless times because I was too lazy to walk back to the tool room to get one, then had to deal with the boogered up pin.

2012年12月26日 · Having a hell of a time trying to remove the roll pin that connects the prop shaft to the front diff. I am replacing the front diff sprague carrier and am stuck at this point. Once its out I am definitely putting a bolt through there. This roll pin …

2024年7月14日 · Use lots of penetrating oil and a roll pin punch to remove it. I usually spray them twice a day for a few days before I attempt to remove them. A roll pin punch has a slight dimple on the end. The dimple helps to remove it. Remember not to be too aggressive as you are beating on it as the front differential is part of the equation.

2018年7月4日 · I was left stranded when the roll pins flew out by centrifugal force (spinning shaft) The drive shart was flapping around. The roll pin does nothing except keeping the u joint from disengaging from the splines. The splines assume the torque load not the roll pin. The 5/16 bolt with a nylok nut wlll endure the centrugal force.

2015年9月29日 · Front Propshaft Removal 1. Remove the center console 2. Locate the prop shaft roll pin and use the Roll Pin Removal Tool (PN 2872608) to remove the roll pin. Discard roll pin. Push the front prop shaft rearward to remove it from the front gearcase input shaft. NOTE: Right front wheel can be removed to gain better access to the propshaft roll ...

2020年1月9日 · Step 4: Combine steps 1-3 into a maniacal laugh while beating on roll pin and punch. Step 5: (Optional) After the 'ping' sound of successful pin removal, feel free to do a dance. Step 6: Replace pin with grade 8 bolt and aircraft style nut.

2012年9月11日 · Google roll pin punch.. But a regular punch will work...it's a coiled metal pin..ie flat metal rolled into a round shape .the key is using one about 1/2 or so of the diameter of the roll pin..it only strikes the inner coils which moves them laterally independant of the outer coils reducing the spring tension.

2020年6月9日 · MORE PROBLEMS. This stupid little roll pin is driving me NUTS!!!. I put the 1/4" pin punch on the air hammer. started to move the pin out. Got about 1/3 of the way out then stuck. Now the punch tool is totally wedged in there. the roll pin is jaggaed out the other side. I tried to punch backwards from the other side but it frayed the pin and no ...