Lift out the daisy wheel by pulling it out of the machine by the protruding 'ear' on the top right. 4. Install the desired daisy wheel into the slot and press down gently. 5. Slide the lever back to its original position to lock the cassette daisy wheel into place. Make sure to press the lever firmly.

If the pin doesnt move, is missing or any petal is damaged, replace the daisy wheel before continuing. 2. Insert the daisy wheel into the carriage. a. Press the black locking lever towards the platen until it clicks, to lock the daisy wheel in place. b. Close the cover and turn on the typewriter. 3. Open the cover and remove the daisy wheel. a.

c. Lift out the daisy wheel and inspect it for damage. Replace the daisy wheel if it is damaged. d. Re-insert the daisy wheel and push the black lever towards the platen until it locks in place. 2. Turn on the typewriter, insert a piece of paper into the typewriter, and type a few letters. 3.

Lift out the daisy wheel and inspect it for damage; replace the daisy wheel if it is damaged. Re-insert the daisy wheel and push the black lever towards the platen until it locks in place. Is the ribbon moving? Lift the ribbon cartridge out of the typewriter; Inspect the ribbon for damage ; If the ribbon is silver, it is exhausted and must be ...

Examine the petals on the daisy wheel for any damage to the petals that are only printing partial characters. 7. Feel the surface of the platen roller, feeling for ridges or other imperfections on the surface. If the surface of the platen roller is pitted or damaged, it should be replaced. If the daisy wheel petals are damaged, the daisy wheel ...

Reinstall the daisy wheel cassette and push the lock lever towards the daisy wheel until it locks in place. Replace the cassette ribbon and close the top cover, plug in the AC cord to the AC outlet, and turn on the typewriter.

1. If the unit is printing the wrong characters in the Word processing MODE, you may have a damaged disk. Press the TW/WP key for the Typewriter MODE. NOTE: Verify that the correct keyboard is selected, press CODE + K to cycle through the keyboard selections. KB1 - (Standard) English Text. KB2 - (International) European Languages using Roman ...

This will hold the carriage in position on the right side of the typewriter. The Ribbon stop fits over the ribbon against the hammer. Once in place, this stop will hold the release lever in place so that the daisy wheel will stay in place. This stop simply slips into position over the …

1. Use the SPACEBAR or BACKSPACE key to move the carriage to the center of the platen. 2. Open the top cover.

1. Check that the ejection path is not blocked. 2. Remove the RD roll and clean the roller and print head with a lint free cloth moistened with Isopropyl Alcohol.