2020年9月25日 · Perivale made several of these clocks before and after the second world war. From at least 1937 onward they were manufacturing movements in Britain: prior to this, they used imported German movements bearing the 'Anvil' trademark.

2011年6月3日 · The Perivale trademark was an Anvil and shows an advert illustrating a Westminster chime pendulum movement first marketed in 1934 which stresses the British "Anvil" Clocks and that the clocks were made in their London factory.

2007年4月15日 · Perivale - the name is from the place (Middlesex - north-west London). They are fairly ordinary movements, not especially quality, but just good. They were marketed under the "Anvil" trademark by Andrew & Co in Hatton Garden, London, then by Bentima from 1937 with the Britannia logo that your clock has. Most of the German movements at this time apart from …

2010年8月10日 · Hello new to the forum, Just aquired a mantel clock and it requires a suspension spring and a pemdulum leader, What info would i need to get the right parts Cheers Tony

2014年4月11日 · Hi Guys, I pulled two of my Perivale Westminster chime clock movements out of storage in order to restore. I've cleaned up both units and noticed that the one Perivale has a different strike re the hammer lay-out. The one Perivale chimes & strikes via the music barrel. The other one chimes via...

2016年8月10日 · Hello folks. I'm hoping someone here might be able to help me get an old Perivale Bentima mantel clock working. It has a sentimental connection since it was my parent's clock when they got married. I can remember this clock as one of my earliest memories from about 1953. The old folks having...

2011年11月21日 · Subject: Perivale Napoleon chiming clock, 1950s with a pin-pallet platform escapement. Problem: Striking and chiming was erratic, plus a missing note, but all three mainsprings were fairly run down, and actual going and keeping time seemed OK. Case was a bit faded (veneered oak). First look:

2009年7月7日 · Dear all, I finally managed to get a Perivale Westminster chiming clock movement. (see attached pic) I decided to disassemble and clean it, I took lots of photos to keep in mind what it looked like to make the assembly easier. It went ok, it took a couple of hours to clean all the things...

2014年3月2日 · Hi, I need some help putting back my perivale movement, I believe I have all the parts but need some help in where to put them. I have attached a picture for ref Thanks Neil

2017年8月13日 · My understanding is Perivale used the same suspension block on their pendulum regulated clocks, it is a simple arrangement with a suspension spring and the top of the pendulum hooks onto a crossbar at the base of the spring, not the crossbar at the top. The pendulum itself is in two parts, the bottom part with the bob hooks onto the top part.