2019年2月3日 · I have the Rockler jig but I've found that plywood spacers work just as well and are simpler for me to use. Just cut some 1/4" or 1/2" plywood spacers on the table saw and use them to space out the sli

2009年1月2日 · The Leigh jig manual describes using the scoring cut and motion Travis offered. That just shows this is a dovetail jig deal, not specifically a Rockler jig problem. I reviewed the Rockler jig a couple years ago and liked it as have lots of my viewers. Have fun!

2024年4月24日 · I had the Rockler coping sled and then bought the Woodpeckers. On both sleds there are clear plexiglass pieces that ride along the fence to keep the sled the same fixed distance from the router bit. On the Rockler sled the plexiglass piece has just one hole so that the distance to the fence is not adjustable and fixed.

2024年1月10日 · I used the slides from Rockler on a television stand. These work perfectly. I did a single track so the two doors can butt together in the center of the cabinet or be at the opposite ends. Alternatively, you can use 2 tracks and the doors slide behind one another. I highly recommend the product. It works

2020年8月7日 · It is easy to machine parts using the lock miter bit, because when i set the bit height right, one part gets cut horizontally on your router table and the corresponding part gets cut vertically. This is the bit that you buy for joining cabinet parts, drawer boxes, and making four sided columns. But i read a article on rockler router bit. And ...

2023年9月27日 · Robert, I have the the JIG IT system and it pretty much works as advertised! I have used it for quadrant hinges, rail hinges and leaf hinges. As I recall, I have had to do some very slight paring for of some mortises, but the jig really …

2012年3月13日 · +1 for the jig to nount the slides to the case. As far as the slides to the drawer box. Sometimes I just keep it simple and mount the slides to the bottom of the sides of the drawer box. or if in the middle of the drawer box is the decision, measure the halfway point on the drawer box side and draw a parellel line front to back.

2018年8月13日 · As my journey into woodworking progresses, I'll share some of my experiences even though they are trivial or elementary to most of you. Maybe some of the newbies will get some benefit. In that connection, I am hyper-sensitive about safety with my SawStop. For two reasons. One, I don't want to...

2008年12月18日 · Power Tools and Their Use ... . ...

2023年2月25日 · Hello all! I’m working on a project that requires my making a good number of drawers. The drawers vary in size from 16” to 24” wide X 18” to 24” in length and a depth range of 2-1/2” to 10”. I have the Milescraft corner bracket and clamping system and Woodpecker’s latest corner holding system...