2014年7月21日 · The baffles have .050" thick skirts , .062" thick necks and .062" thick faces , the baffle face has a .110" tall cone leading into the bore. The baffles are .996" in OD and have a tight-ish .25" bore that was bored concertic with the OD one baffle at a time (i had run into bore alignment issues one just deep drilling a bar and cutting baffles ...

2011年3月16日 · This is a form 1 suppressor but it is a copy of the Spectre: Brand new from shot show 2011: The Octane9: It can be disassembled by the end user to be cleaned. It comes in two versions, All stainless steel baffles (on left) or stainless blast baffle and the rest aluminum baffles (on right) Specwar 5.56: Octane 9: Octane 45:

2010年11月4日 · McLarenross wrote:Is the reason for using the maglite tube and freeze plug baffles cost savings or lack of machine tools? If cost savings, I think its gonna come out about the same versus using all stainless and machining the baffles. I have $125 in my fully machined and welded stainless steel 30 cal suppressor.

2010年1月10日 · replacing baffles in a form 1 silencer General silencer discussion. If you want to talk about a specific silenced rifle or pistol, it is best to do that in the rifle or pistol section for that brand.

2009年12月6日 · OK, here we go. A Tubeless Suppressor. I’ve been told there is a Patented one already but couldn’t find it. I’ve seen and used this type of Suppressors several time. I’ve been working on it on my free time and finally got something to show. It’s a 11 inches long x 1,75 inches OD for a total weight of 16/17 ounces.

2020年11月11日 · Was doing a bit of research today on suppressor cleaning. Decided to try out some different products for chemical cleaning suppressor pistons and baffles. - Lucas Deep Clean Gasoline Direct Injection Cleaner - Seafoam Spray Top Engine Cleaner & Lube - Lucas Multi-Purpose Parts Cleaner & Degreaser

2010年10月1日 · First up is baffle stack next to the suppressor tube. All the baffles were the same except the 'blast baffle' has a Dater hole in it. Side view of AAC K baffle. Baffle angle view. Baffle top view. Blast Baffle bottom view. Notice the Dater hole. Baffle stack next to the suppressor tube in the order they came out of the can, left to right.

2013年5月8日 · More baffles might meter better, but to my ear, I couldn't tell a whole lot of difference between an M4-1k, a Lane Scorpion, a 762-SDN-6, or an M4-2k. Centerfire supersonic is just LOUD. The suppressor helps mitigate a LOT of the noise, but I was really surprised at the overall sound. Its gotten me going back to the drawing board, for sure.

2022年5月8日 · I just made a K baffle suppressor and shoot it with my homemade pistol here is my set up. K baffle:OD 23.15mm ,ID 9.3mm ,length 20mm,cone angle 60°. can: OD 24mm,ID 23.15mm,length 200mm,blast chamber 72mm. shooting with nail gun blank bullet 6.8*25mm(velocity about 800FPS~2000FPS). projectile: 8mm steel ball .

2011年6月2日 · In examining baffles after firing I note that the powder residue is very evenly distributed. Other baffles such as simple M's have tended to remain almost clean near the orifice, with heavier deposits around the outside. Hard anodized for durability and easy cleaning, I clean my baffles frequently in an effort to preserve them.