2015年10月2日 · When I looked about my switch, it says that it disables that port when using the Uplink port. I'm still a bit fuzzy on what the Uplink port does for me, I had always assumed that this Uplink port was for me to plug into from my router which is elsewhere in the house and hooked up to the modem so it could allow the switch to work for my other ...

2011年8月10日 · Hubs, switches and routers typically designate one Ethernet port as the uplink connection. This type of port may be labeled WAN or Internet instead of uplink, but all serve the same purpose. And regular switch port (normal port) …

2008年12月9日 · hi everbody! I have few questions about uplink port on a switch. My understanding is uplink port is usually used to connect to another switch/hub.When using uplink port to connect to another switch uplink port ,we need staight through cable as pins inside the uplink port is rversed,thereby eliminati...

2015年9月4日 · A downlink port generally mean the converse. In this particular usage, the switch's downlink ports are dual speed copper ports. The uplink ports are gig and copper/fiber capable. The expectation might be users hosts will connect to the downlink ports and the uplink ports will take the aggregate traffic into the rest of the network.

2021年6月27日 · I need some help in understanding the usage of an switch uplink. Lets take the C1000-24T-4X-L as an example. It has 24 Gb ports and 4 SPF+ uplinks. My basic understand it that these uplinks are used to connect multiple switches together. Would I be correct in assuming that one of the regular Gb por...

The TRUNK port to the Linux router will carry both VLANs (tagging one or both.) The linux router would then have a physical interface (eth0) and one or two vlan interfaces (eth0.X and eth0.Y -- depending on the numbers you choose for your vlans) I suggest two tagged VLANs to avoid any confusion between eth0 (untagged) and eth0.#.

2010年10月25日 · My boss is pushing me to make the switch configurations for our access switches as simple as possible. Basically there would be an access switch connected directly to my core switch, a Catalyst 4507. I'm not real crazy about the idea of using the uplink as an access port, and leaving the vlan assign...

2008年8月6日 · uplink is the link from access layer to distribution layer. and should be Trunk link to carry all vlan traffic . not like access port which is a port connected to end stations. also somtimes uplinks can be gorup of ports in one channel called etherchannel. in this case . group of phisical trunck port will be represented by one logical port

The term "uplink" can have several meanings depending on the context. Most commonly in a networking context, it means a port that connects to another device that's "closer" to the data source. For example, on an access switch, the port that connects the switch to the distribution or core switch would be considered the uplink port.

2024年10月31日 · Actually as it turns out the port channel was the same on both switch from the uplink port, ie. switch 1 port 1 and port channel 8 and switch 2 port1 had port channel 8, I needed to rename as port channel 8 was already in use.